Hello dear friends
I showed how can you hack wireless passwords on windows operating systems! We don’t need to use backtrack or linux etc for like simple wifi hacking! Only, i spend 30 seconds and the program hacked WPA2 wifi password !
Programs: Click Here
If you will use it for illegal attacks, i’m not responseble person about that. Who will use this program, person be deemeed to have accepted !
Programı hacking amaçlı kullacak kişiler tüm sorumluluğu üzerine kabul etmiş sayılır. Video eğitim amaçlıdır.
E-Mail: mertkaplan.tr@gmail.com
Eternity said:
Hi
Thanks for your post, I tried but jump start never shows complete screen, please help me on this.
mertkaplanblog said:
Did you already setup Winpcap ?
diwa said:
i have installed jumpstart software but not find network key. it mean setup locked, how it is solve the problem..i just click in this button ” Iniciar jumpstart ” but not able to get key,,,its showing setup locked
janzz2010 said:
can t see on step no.2 kindly email me for step by step tutorial
mertkaplanblog said:
please install winpcap
noor hanan said:
wireless config faild what reason
Afrasiab Anjum said:
I cannt download jumpstart. i have installed Dumper v.40.1. please help me in to download jumpstart.
mertkaplanblog said:
i already shared….
Kashif said:
Hey bro the jumpstart setup also is present in dumpper software which you downloaded
mertkaplanblog said:
What ever do you want to use
Geo said:
Can I have the link for Winpcap
mertkaplanblog said:
http://www.winpcap.org/install/bin/WinPcap_4_1_3.exe
james said:
Thanks a lot. It’s working.
John said:
What about WEP, the application only lists wpa.
mertkaplanblog said:
It’s also working on WEP
Jon said:
it doesn’t work on Wep
mertkaplanblog said:
it works
BFB said:
Hi,
I have installed winpcap and jumpstart.
The network scan is working fine, but, after select SSID and click on Start JumpStart button, i see the message below:
The computer has no Wireless Network adapter that is enabled.
Some of the features of this software will be disabled.
This message is not true, because my wlan is ok and scanning a lot of ssids very well.
The same error happens using Dupper v30.9 and v60.7 versions.
Can you help me to fix this issue?
Thanks
mertkaplanblog said:
Are you sure about corect choose your network adapter on Dummper? Also another application could be using your network adapter, that is why could be not working. Please check which applications working on your operating system.
BFB said:
Yes. It was correct, because I have only one network adapter. Also I was not using another application, has rebooted my notebook too.
Today night I will test with other notebook. I keep you updated about the results.
Tks
mertkaplanblog said:
You are welcome bro.
anton said:
hi there , i got also the problem :
The computer has no Wireless Network adapter that is enabled.
Some of the features of this software will be disabled
any idead how a fix this ? i tried to download jumpstart a couple of times but that aint work stil the same massage
mertkaplanblog said:
can u send your process manager and your error screen shots please…
Kartik Gaur said:
Hi,
i am unable to use the jumpstart software as it give me the error while installing it
ERROR: “unable to find jswpsapi.exe in program files”
i am using windows 7 Pro. 32 Bit.
is there a direct link to download “jswpsapi.exe”….??
BFB said:
Hello Mert,
As I said, I tried using another device. The scan was finished, but it was not impossible discover the password. Your application works fine to wifi with WPA-PSK?
Thanks
Dinesh Suranga said:
I’m using windows 8.1. I ran this programme. see this screen-shot please and help me http://i.imgur.com/JLSNgDC.jpg
mertkaplanblog said:
remove your connected device and try again.
Gamal said:
which connected device you mean?
mertkaplanblog said:
your pc connected wireless devicess…
trueblood said:
where will I get jumpstart and dummper
mertkaplanblog said:
I already shared
Nik Singla said:
thank you very much bro…
i cant explain in words that what you have done for me.
i was trying to do this for almost three years and you have done it in 25 seconds.
i still cant believe on my eyes that a program like this also exists.
a very very thanks once again
!! Radhe Radhe !!
mertkaplanblog said:
You’re welcome bro.
y2j said:
Where do I get the Wps Pin lol for the choosed network ?
mertkaplanblog said:
Program can shows the wps pin.
jef said:
then, how to crack wep password?
tamanna said:
I want to know how to hack wep password through this method ?
tamanna said:
how to get wep password ..your application jump or dumper is in another language.i jus want to know how to get wep..please describe in text
rte said:
bro,i cannot watch the video …so can u show me the steps to my hack my wifi password?
thank you
mertkaplanblog said:
check my channel
http://www.youtube.com/user/mertkaplanblog/videos
Seth said:
Good morning,Shall I installed programs dotNetFx40_Full,dumpper,Jumpstart.Reflects any net to selection,where’s please problem??Shall I win 7 ultimate x64.Wifi at selection shows no MAC address thank you Seth
mertkaplanblog said:
wincap install bro
Seth said:
WinPcap 4.1.3 is also installed Seth
mertkaplanblog said:
delete your winpcap and other programs and restart your computer and again try to install
Seth said:
Deinstalled I’m microsoft.NET Framework 4,winpcap 4.1.3,dumpper.applied ccleaner correction registers.Restart.Then install up – to – date microsoft.NET Framework 4.5.3,winpcap 4.1.3,dumpper,3x restart,but always cut dead bssid and mac address in programme jumpstart.antivirus and firewall isn’t installed and windows defender real time out of gear.It’d yet had function.I’m already frustrated. Seth
Seth said:
Problem solved.Shall I external usb wifi tp – link TL-WN722N and tp – link TL-WN821N with chipset Atheros that the badly fall in with plans jumpstart..On another pc with wifi Broadcom 802.11 n, programme jumpstart quite functionally.Advise st. to what external usb wifi will function with Jumpstart correctly?Title and model designation that the puts buy in evropa?Have fine and thanks Bro
Eric said:
What do you need the winpcap for?
mertkaplanblog said:
the programs needs that.
siraj said:
Bro my jumstart showin like prtocol failed to conect the selected network .. What to do next
Rply
Eric said:
I’m running the programs I got the Dummper and Jumpstart and winpcap. I’m doing what was done in the video but I’m not getting any results.
mertkaplanblog said:
The program cannot gives %100 success guarantee
huma zed said:
it works only on wps wifi not no all kinds
Pingback: How To Fix Winpcap 4.1.3 Error in Windows
Yahia Hassan said:
link for jumpstart please
Yahia Hassan said:
and tutorial video bro please
Yahia Hassan said:
and link for dumper
Atis said:
thanks a lot ! it worked for me!
only diference from your video – i must put acess pin manualy from dampper to jumpstart.for the first time.then it automaticly 🙂
Frustratio said:
Can anyone who speaks decent English help me out? I run the program EXACTLY as the video shows, but it never completes. I’m trying two different wireless networks and regardless of which I select Jumpstart just keeps retrying over and over and over but never actually connects. The networks aren’t set up to be particularly obfuscated and this method _should_ work to connect to them. I installed Winpcap and disconnected the laptop from all wireless devices. My wireless driver is an Atheros AR5007.
vijayavijji said:
jumpstart says no wireless network adapter is connected but i checked every thing is fine it only doesnt work in jumpstart
pintu said:
It is working nicely but after jumpstart scanning it is closing all of sudden and how will i get password
mukesh said:
sir ,from where we get jumpstart..plz send me link on mukesh260689@gmail.com
Aton said:
Not working the codes it shows are not correct. tested on my own router to check whether it work or not.. but the code isn’t working
Kelly said:
Am getting an error: Unable to join or Configure this network. The access point is in a “Setup Locked” state which does not allow remote configuration.
AD said:
hi bro,
i’m install jump start.
when run dumpper i’m facing a problem.
in Redes part click on scan.a list of avaliable wifi network is show clearly but in WPS part Escanner not find any wifi.
how to solve this problem bro
Paritosh said:
I tried every thing but when jumpstart starts it cant find the password plzz helpp
AD SHARMA said:
in wps part after scan ,select wifi and hit jump start. jump start but automaticaly exit after some moment not give password.how to solve this problem
taylor said:
Unable to Join or Configure this network. The access point is in a “Setup Locked” state which does not allow remote configuration. Try rebooting your access point to get it out of this state or consult your access point manual on how to unlock it so that setup
semed said:
Unable to Join or Configure this network. The access point is in a “Setup Locked” state which does not allow remote configuration. Try rebooting your access point to get it out of this state or consult your access point manual on how to unlock it so that setup
Null said:
The application was unable to start correctly (0xc000007b). Click OK to close the application.
mertkaplanblog said:
Google it, no idea
Rrx said:
is it work only with wps networks or non wps networks too like android wpa2 psk secured wifi
mertkaplanblog said:
Yes should be wps
Kashif said:
Hi bro
1.First you have to download dumpper.
2.then open with win.rar.
3.find and install setup.exe which is jumpstart
4.then install dumpper.exe
5.open dumpper and click wps
6.choose Tatocause and choose your network and click it
7.then it display wps pin below
8.click jumstart
9.finally you will hack the network
mertkaplanblog said:
Yes true
AD SHARMA said:
sir, this software is not working for dlink router.it is working only on tplink router. also suggets me crack mblaza wifi password
Kashif said:
I can’t download dumpper v.50 through my mobile, please give me the link for download
mertkaplanblog said:
You shouldnt download with mobile
johny said:
it doesnt work help me
Kashif said:
Please tell full information about What was not worked?
mertkaplanblog said:
Problem?
mertkaplanblog said:
What is the problem?
Niggamon said:
Could you help me please. Ive done all the step very well but one I press Iniciar it does everything automatically but the bar never fills itself. It gets stuck on “Running the communication protocol” and then for half a second it shows “the protocol failed ( Its so fast I cannot read the rest but after some time it shows Unable to complete the configuration. Please help
mertkaplanblog said:
Could be no wps
Niggamon said:
What do you mean no wps? Because on the wps tab there are connections. I launch jumpstart from Dumpper (Iniciar) but while it is accessing the connection it fails to do so… it ends up saying it didnt work.
mertkaplanblog said:
Send me picture
mertkaplanblog said:
Record video and send me
Niggamon said:
Where to send the video? or the picture?
nin said:
not working wps bar
mertkaplanblog said:
Try another
Ranjauuu said:
Bro, i’ve installed all the required software (Dumpper, jumpstart, winpcap, net framework) and followed all instructions.
1. When i open Dumpper, on the Networks (Redes) tab, i clicked Scan and all the wifi networks appeared.
2. Open the WPS tab, choose All Networks (Todas les Redes) and click Scan. However nothing appeared.
I don’t what is the problem.
Please help me bro.
mertkaplanblog said:
Winpcap?
John said:
I have installed everything. When running dumpper, jumpstart starts up and appears to work then shuts down. I have tried a few different versions of dumpper. Please advise. Thanks!
Aaron said:
When I click scan on Redes tap , it doesn’t work , actually it’s empty , There are a lot of wifi around my laptop but when I scan it doesn’t show anything… and there is one thing to choose in adaptadores de red , that is chosen , but however I click on scan , it’s empty , there is nothing , help me please,
mertkaplanblog said:
Could be your wifi cart cannot support
nomina said:
I have used this method in 5 laptop but still not be able to scan in wps tap..
help me
zOKS said:
Doesn’t connect to any of the 9 networks that appear in the scanned list.
Maris said:
In the Wps tab i cant see WEP networks. Cracking WEP is different than WPS?
mertkaplanblog said:
could be, try
M rafey said:
when i click on jumpstart then there is no problem but after the end it is not working and network not conect i tried it about 15 times